User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-45
Chapter 3 - Using Wave Phone Features Saved Number Redial
SAVED NUMBER REDIAL
This feature allows a user to save a number he has just dialed or is connected
to on a key so it can be easily re-dialed. Saved Number Redial requires a
programmed Save/Repeat key on your phone. Contact your system
administrator for more information.
Using Saved Number Redial [D]
For DIGITAL Phones
Saving a Number
While hearing ringback or while connected on a call, press Save/Repeat.
If the number to be saved is from an outgoing call, the number will be saved
as dialed. If the number to be saved is from an incoming call (and provided
caller id for the call is available), the Call Return access code will be added to
the beginning of the before saving so that it can then be dialed.
Redialing a Saved Number
From an idle phone, press Save/Repeat.
The most recently stored number will be dialed.
Storing the Saved Number as an Autodial
The Save/Repeat key is intended to be a quick method to temporarily store a
number. Only the number is stored; the user is not prompted to enter a name
and the value stored is not password protected.
For numbers that will be used often by the user, programming an AutoDial key
is recommended (see page 3-2).
To program a saved number on an AutoDial key:
1. From an idle phone, press MENU softkey on the display.
2. Press
NEXT until EDIT appears, then press the corresponding key.
3. Follow the prompts; enter the location and the name to be assigned to
the key.
4. Press the
Save/Repeat key when Number? appears on the screen.
The number stored in that key will be copied into the AutoDial key.