User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-43
Chapter 3 - Using Wave Phone Features Password Protection
PASSWORD PROTECTION
You can configure your phone so that it requires a password before allowing
user programming such as editing the Autodial buttons, programming feature
keys, and changing the voice mail display. Contact your Wave system
administrator for information about password protection settings.
Using Password Protection [D]
For DIGITAL Phones
To activate/deactivate password protection:
From an idle phone:
1. Press
MENU softkey on the display.
2. Press
NEXT until PPROT appears, then press the corresponding key.
3. Enter the appropriate password, then press # or Done.
4. Select On to require a password before allowing user programming.
OR
Select Off if you don’t want a password required.
PRIVACY
The privacy feature is used to mark a call as private which means that shared
line appearances will be prevented from breaking into the call.
Additionally, a held private call can not be retrieved by a shared line
appearance. Privacy is generated from any privacy enabled party to all parties
in a call.
Transferring or parking a private call removes privacy from the call.
Using the Privacy Feature [D]
For DIGITAL Phones
To make a call private:
While ringback is heard or during a call, press Privacy.
• If you don’t have a programmed Privacy key, press FLASH, then
*21.
• If a call is in privacy, all parties in the call will have the LED on any
configured Privacy key illuminated red.
To turn privacy off:
Press the illuminated Privacy key.
If you don’t have a Privacy key, press FLASH, then *21.