User guide

3-36 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 3 - Using Wave Phone Features Intercom button
INTERCOM BUTTON
SIP PhoneModels 480i/480CT only
You can use this button to make calls from your phone to another extension
within your phone system.
Note: To see other call procedures, refer to “Making Calls” on page 2-10.
Using the Intercom Button [S]
For SIP Phones
To make an intercom call:
1. Press Intercom ().
2. Dial the extension.
3. To end the call, press Intercom (), Goodbye, or the Drop softkey.
JOINING A CALL
When a line appearance on your phone is in use by another party, the LED
next to the corresponding key indicates whether you can join that call.
• A Red LED indicates that Break-in is blocked.
• A flashing green LED indicates that Break-in is allowed.
Using the Call Break-in Feature [D]
For DIGITAL Phones
To join a call:
Press the line key corresponding with the call if the green LED is flashing.
Note: Some outside lines can carry more than one call at one time. Break-in
permission is not allowed on those outside lines.