User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-33
Chapter 3 - Using Wave Phone Features Headset
For ANALOG Phones
You can have your calls forwarded to an outside line (for example to a branch
office or your home) or to another extension within the Wave phone system.
To forward your phone to an external phone:
1. Listen for dial tone and press *43.
2. Enter the external line access code.
3. Dial the external (destination) phone number, then #.
4. Listen for two beeps.
5. If prompted, enter the appropriate voice mail password, then *.
To forward your phone to another extension:
1. Listen for dial tone and press *43.
2. Dial the destination extension.
3. Listen for two beeps and hang up.
To cancel either external or internal forwarding
1. Listen for dial tone and press *44.
2. Listen for two beeps and hang up.
HEADSET
Using a Headset [S]
Follow the procedure below when making and receiving calls using a headset.
For SIP Phones
1. Ensure that you have selected a headset audio mode by accessing the
Options list (under
Option 7.Headset Settings).
2. Plug the headset into the jack.
3. Press ( on models 9112i and 9133i) to obtain a dial tone or to
answer an incoming call.
Depending upon the audio mode selected from the options menu, a dial
tone or an incoming call will be received on either the headset or the
handsfree speakerphone.
Hint: See pages 4-2 through 4-6 for information about phone models
and their associated keys/buttons. Also see “Using the Speaker Feature
[S] / [D]” on page 3-47.
4. Press End Call.
for models 480i/480CT, press Goodbye ( or use the “Drop” softkey
to end the call.