User guide

3-32 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 3 - Using Wave Phone Features Forward Calls
Using Forward (Follow Me)
From any phone in the system, you can specify an extension to which you
want your calls forwarded.
Example: You go to work in a lab room and want all calls forwarded to that
room, but have forgotten to set the forward prior to leaving your
office. You can pick up the phone in the lab and set it for the
Follow Me forward. All calls to your office phone will then ring in
the lab (until you cancel the setting).
1. Listen for the dial tone.
2. Press *78.
3. Enter the destination extension.
4. If prompted, enter the appropriate voice mail password.
To cancel Forward (Follow Me)
1. Listen for the dial tone.
2. Press *79.
Programming the User Forward Key
To program a number on your User Forward key:
1. From an idle phone, press MENU softkey on the display.
2. Press
NEXT until PROG appears, then press the corresponding softkey.
3. Press NEXT until UFwd appears, then press the corresponding softkey.
4. Press the key you want to assign as the User Forward key.
5. Enter the number.
If you enter an external phone number, be sure to include the external
line access digit (usually a 9).
6. Press SAVE to store the setting.
7. Press SPEAKER to exit the menu.
To use the programmed User Forward key:
1. Press the User Forward key.
2. If you are prompted for a password, enter your Voice Mail password,
and press #.
You will hear two beeps, the User Forward key red LED will flash (indicating
that Forward is enabled), and
FWD is displayed.