User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-31
Chapter 3 - Using Wave Phone Features Forward Calls
To cancel call forwarding:
Press Forward.
The Forward key LED goes off.
If you do not have a programmed Forward key, dial *44 to cancel call
forwarding.
For DIGITAL Phones
The User Forward key applies only to calls received on your primary line. You
can activate only one User Forward key on your phone at any given time.
The Forward feature will behave differently depending on whether or not your
User Forward key is programmed with a target phone number.
To forward calls to internal extensions
1. Press User Forward.
2. Enter the extension number to which you want to forward calls.
The User Forward key red LED flashes indicating that Forward is
enabled, and
FWD is displayed.
If you do not have a programmed User Forward key, dial *43 plus the
extension number to which you want to forward calls.
To forward calls to external phone numbers
1. Press User Forward.
If you do not have a programmed User Forward key, dial *43.
2. Enter the external access digit(s).
The digit that allows you access to an external phone line (usually a 9).
3. Enter the phone number to which you want to forward calls.
If you enter an international phone number, you must enter a # at the end
of the number.
4. If you are prompted for a password, enter your Voice Mail password,
and press #.
You will hear two beeps, the User Forward key red LED will flash
(indicating that Forward is enabled), and
FWD is displayed.
Note: When you go off hook you receive "stutter" dial tone to indicate
your phone is a special state.
To cancel call forwarding (internal/external)
Press User Forward.
The User Forward key LED goes off.
If you do not have a programmed User Forward key, dial *44 to cancel
call forwarding.