User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-29
Chapter 3 - Using Wave Phone Features Flash
For DIGITAL Phones
The Do Not Disturb programmable key on your phone is set up by your system
administrator.
To enable Do Not Disturb:
Press Do Not Disturb.
The Do Not Disturb red LED lights, and DND is displayed.
If you do not have a programmed Do Not Disturb key, dial *41.
Note: When you go off hook you receive "stutter" dial tone to indicate
your phone is a special state.
To cancel Do Not Disturb:
Press Do Not Disturb.
The Do Not Disturb LED goes out.
If you do not have a programmed Do Not Disturb key, dial *42.
Note: You can enable/disable DND using the softkeys as well.
1. Press MENU, then press NEXT three times.
2. Select DND.
3. Select
ON/OFF.
4. Exit or
SPKR to end.
FLASH
The FLASH button is utilized in many of the features of this phone (such as
when making calls, transferring calls, or placing calls on hold). It is often used
in conjunction with “star codes” (see Star Code Reference listing on the back
of this guide).
• The location of the FLASH button may vary from model to model. Your
phone may have button labeled FLASH. However, it might have a button
labeled Link or Call Wait. Check the diagrams of the various models in
Chapters 4 though 6 of this guide according to the type of phone you are
using (SIP, digital, or analog).
• If there is no button labeled FLASH, you can emulate a “flash function”
by tapping the button located under the handset.