User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-25
Chapter 3 - Using Wave Phone Features Direct Station Select/Busy Lamp Field
For DIGITAL Phones
To use Dial By Name:
1. From an idle phone, press the MENU softkey on the display.
2. Press
DIAL.
3. Press Int or Ext to specify an internal or external name.
4. Press First or Last. The name search can be done last name first or first
name first.
5. Press the keypad digit that corresponds to the first letter for the name
being searched.
6. When the correct name is displayed, press
More, then press Dial to place
the call.
If you do not see the correct name right away, you can spell out the name
further using the keypad, or press
Next to scroll through the list.
DIRECT STATION SELECT/BUSY LAMP FIELD
Direct Station Select/Busy Lamp Field (DSS/BLF) keys allow you to monitor
the status of extensions, to call extensions with one key press, and to easily
transfer calls to them.
DSS/BLF keys are configured by the system administrator or by user
programming and can be configured for blind or supervised transfer.
A solid red LED next to a DSS/BLF key indicates that the line is in use. A
flickering red LED indicates the extension is ringing. A blinking LED indicates
that the extension has a call on hold.
Using the DSS/BLF Feature [D]
For DIGITAL Phones
Calling an Extension
Press the DSS/BLF key to call the programmed destination extension.
Using Supervised Transfer
A supervised transfer allows you to announce a call before completing the
transfer.
To make a Supervised Transfer:
1. While connected to another party, press the DSS/BLF key for the
destination extension.
2. When the destination party answers, announce the call.
3. Hang up or press SPEAKER to complete the transfer.