User guide

3-24 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 3 - Using Wave Phone Features Dial By Name
For ANALOG Phones
To set up a Conference:
1. With a party on the line, press FLASH, then #.
2. Dial the phone or extension number of a conference member.
3. After the conference member answers, press FLASH, then *5.
4. Repeat for each additional conference member.
If you dial a member that is not available:
Press FLASH, then *4 to return to the conference.
DIAL BY NAME
The Dial by Name feature allows a call to be placed by entering a name using
the keypad or by scrolling through a list of names. There are two lists of names
that can be searched: one of internal names and one of external names.
About Dial by Name [D]
The Dial by Name Internal list will include the following numbers:
• Extensions in the database.
• Numbers listed in the Off-premise table.
• Primary Line Appearance Call List (if the calling party number is less
than seven digits).
• Autodial feature keys (if the stored number is less than seven digits).
• System Speed Dial numbers (if the stored number is less than
seven digits).
The Dial by Name External list will include the following numbers:
• Primary Line Appearance Call List (if the calling party number is
seven digits or more).
• Autodial feature keys (if the stored number is seven digits or more).
• System Speed Dial numbers (if the stored number is seven digits or
more).