User guide

3-14 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 3 - Using Wave Phone Features Call Waiting
To release the initial call:
While the initial call is active, press End Call.
• For models 480i/480CT, press Goodbye ( or use the
“Drop” softkey.
The initial call is dropped and you are reconnected to the call waiting call.
The call waiting call is rolled onto the primary line key.
Hint: You can add a call waiting call to a call on your primary line by pressing
Conference. See “Blocking Caller ID [ALL]” on page 3-15 for more information
about the Conference feature.
You can transfer a call waiting call to another extension. See “Transfer” on
page 3-50 for more information about the Transfer feature.
You can park a call waiting call for pickup on another extension. See “Call
Pickup” on page 3-9 for information about parking calls.
To disable Call Waiting:
Press *70, and dial the phone number.
Call Waiting is disabled for the duration of the call. Call Waiting is
re-enabled when the call is terminated.
For DIGITAL Phones
To accept a call waiting call:
Press Call Waiting.
If you do not have a programmed Call Waiting key, press FLASH to
answer the call.
The initial call is placed on temporary hold.
To reconnect to the initial call:
Press the TAP key.
The call waiting call is placed on temporary hold.
You can toggle between the initial call and the call waiting by pressing
the TAP key. The display updates to reflect which caller is connected.
Note: If Call Appearance keys are programmed for a line, additional calls on
that line will appear on those keys. The Call Waiting key will only be utilized if
there are no available Call Appearance keys to associate with the new call. For
more information see “Multiple Call Handling” on page 3-38
.
To disable Call Waiting:
Press Call Waiting or *70, then dial the phone number.
OR
Press Call Waiting during an active call.
Call Waiting is disabled for the duration of the call. Call Waiting is
re-enabled when the call is terminated.