User guide

3-8 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 3 - Using Wave Phone Features Call Park
For DIGITAL Phones
To system park a call:
1. While on a call, press System Park.
If you do not have a programmed System Park key, press FLASH, then
*62 to park a call.
2. Listen for two short beeps, and hang up.
The display shows the parking slot number where the call is parked. Be
Sure that you remember this number since you’ll need to use it to
retrieve the call.
The System Park red LED remains lit until the parked call is retrieved.
If you leave a call parked for a long period of time, your phone rings
back, and PARK is displayed.
Note: Even while a call is parked from your phone, and the System Park
button’s red LED is lit, you can still query parking slot of the last call parked
from your phone by pressing
MENU, then the System Park button.
To retrieve a call parked on the system
1. From any extension, press System Park.
If you do not have a programmed System Park key, dial *63.
2. Dial the parking slot number on which the call was parked.
For ANALOG Phones
To system park a call:
1. With a party on the line, press FLASH, then *66.
2. Listen for two beeps.
3. Hang up.
Note: You can also use an alternative method:
1. With a party on the line, press FLASH, then 6.
2. Listen to the system prompt for the slot number.
To retrieve a system parked call:
1. Listen for dial tone.
2. Press *63.
3. Dial the appropriate slot number.