User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-7
Chapter 3 - Using Wave Phone Features Call Park
System Park [ALL]
Place a call in one of the ten “parking slots” on the Vertical Wave system for
retrieval from another phone.
Note: Any Vertical Wave phone with the Enhanced Call Waiting feature
within the system may be used to retrieve the call. Ask your phone
administrator if you are unsure if this feature is available on your phone.
For SIP Phones
To park a call on the system:
1. While on an active call, press System Park.
If your phone does not have a programmed System Park key, press
FLASH and dial *62 to park a call.
2. Listen for two short beeps, and hang up.
The display shows the parking slot number at which the call is parked.
Make a note of this number as you’ll need it to retrieve the call.
The number will remain on the display until the call is disconnected, you
place another call, or another call rings on your primary line.
The System Park LED remains lit until the parked call is retrieved.
If you leave a call parked for a long period of time, your phone rings
back, and
PARK is displayed.
To retrieve a call parked on the system:
1. From any extension, press System Park.
If your phone does not have a System Park key, dial *63.
2. Dial the parking slot number on which the call was parked.