User guide

3-6 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 3 - Using Wave Phone Features Call Park
To retrieve a parked call:
1. From any phone, press Self Park.
If your phone does not have a Self Park key, dial *65.
2. Dial the extension on which the call was parked.
For DIGITAL Phones
To park a call at your primary line:
1. While on a call, press Self Park.
If you do not have a programmed Self Park key, press FLASH, then *64
to park a call.
2. Listen for two short beeps, and hang up.
If you leave a call parked for a long period of time, your phone rings
back, and
PARK is displayed.
To retrieve a parked call:
1. From any phone, press Self Park.
If the phone does not have a Self Park key, dial *65.
You can also use the Direct Park key (if programmed).
2. Dial the extension on which the call was parked.
For ANALOG Phones
To self park a call:
1. With a party on the line, press FLASH, then *64.
2. Listen for two beeps.
3. Hang up.
To retrieve a self parked call:
1. Listen for dial tone.
2. Press *65.
3. Dial your extension.