User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-5
Chapter 3 - Using Wave Phone Features Call Park
For SIP Phones
To direct park a call:
1. With a party on the line, press FLASH, then *66.
2. Dial the extension.
3. Listen for two beeps.
4. Hang up.
To retrieve a direct parked call:
1. Listen for dial tone.
2. Press *65.
3. Dial the extension.
For ANALOG Phones
To direct park a call:
1. With a party on the line, press FLASH, then #, then *66.
2. Dial the extension.
3. Listen for two beeps.
4. Hang up.
To retrieve a direct parked call:
1. Listen for dial tone.
2. Press *65.
3. Dial the extension.
4.
Self Park [ALL]
Self Park places a call in a parked state on your primary line for retrieval from
other phones.
For SIP Phones [Model 480i/480CT]
This feature is pre-configured on the 480i/480CT model.
To park a call at your primary line:
1. While on an active call, press Park.
If your phone does not have a Park key, press FLASH and dial *64 to
park a call.
2. Listen for two short beeps, and hang up.
If you leave a call parked for a long period of time, your phone rings
back, and
PARK is displayed.