User guide

Wave Phone User Guide July 2007 - Issue 1.0 3-3
Chapter 3 - Using Wave Phone Features Call History
7. Enter the number you want to assign to this key.
If you are programming an external phone number, enter the full phone
number (including the external access digit(s) and area code).
You can press the TAP or FLASH button to enter a flash at the start of
the dialing string (to use Flash codes). You can press HOLD to insert a
pause in the dialing string.
8. Press SAVE when all the information has been entered.
9. Press SPEAKER to exit the menu.
To use Auto Dial key:
Press the Auto Dial key assigned to the number you want to dial.
CALL HISTORY
A list of up to the last ten outgoing, ten incoming, and ten missed calls is stored
for each phone. Note that multiple calls to or from the same destination will
result in one entry in the list.
Missed calls are not logged if the call is to a hunt group in which the user is a
member.
Using Call History [D]
For DIGITAL Phones
To access the Call Lists:
1. From an idle phone, press MENU softkey on the display.
2. Press
LISTS.
The display will show the number of outgoing calls (O:), missed calls (M:),
and incoming calls (I:) stored.
3. Press Out to view the outgoing list, Miss to view the missed calls list, or
Next then In to view the incoming calls list.
While viewing a list you can scroll through the list by pressing Next, or
press Sel to select the call and see when the call was made. Pressing
Dial at this point will call that user.
To clear the Call Lists
From an idle phone:
1. Press
MENU softkey on the display.
2. Press LISTS.
3. Press Next.
4. Press Clear.
5. Choose either the
Out, Miss, (or Next, then) In list to clear, or All to clear
all three.