User guide

2-10 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 2 - Basic Operation Basic Phone Handling
Ending a Call
You can either hang up the handset, press the SPEAKER key (if available) to
end calls, or use the Hold feature when ending a call.
• For SIP Phone Models 9112i and 9133i, you can also press Goodbye
( also known as End Call on) to drop the active call.
• SIP Phone Models 480i/480CT also includes a “Drop” softkey that can
be pressed to end the call.
Using Hold when Ending a Call
You can use the Hold feature to end one call without losing other calls that
might be on hold for you.
To end a call without losing your call(s) on hold:
1. Hang up the phone or press Flash 3 to end the current call.
If you hung up, pick up the phone.
2. Press Flash 4 to connect to the call still on hold.
If you have multiple calls on hold, you will hear a menu from which you
can select the call to which you want to connect.
Making Calls
Dialing Internal and External Numbers
Internal calls are calls to other Wave extensions. External calls are calls to
outside numbers, including calls to another phone system (PBX), a Centrex
extension, another Wave system such as a branch office, and an Internet
address.
Note: If you encounter a delay after dialing before your calls are connected,
you can press # after the extension or number, for example, 187#. This skips
the delay.
To dial an internal number:
Do one of the following:
• Dial the extension number.
• Dial the extension number followed by * to go directly to voicemail, if
you administrator has enabled that feature (see below for details)
• Press
411 for the dial-by-name directory.