User guide

Wave Phone User Guide July 2007 - Issue 1.0 2-9
Chapter 2 - Basic Operation Basic Phone Handling
Answering Calls
Aside from using the handset or speakerphone (when available), the operation
of the Wave phones is quite basic. The main functions you’ll probably be using
are:
• Using the Hold feature
• Using the Call Waiting, Call Park, Pickup, and Transferring features
Using the Hold Feature
You can place calls on hold and place a new call, switch between calls on hold,
and end a call without losing other calls on hold.
To place your current call on hold and place a new call:
1. Press Flash # to place the current call on hold.
You will hear a dial tone.
2. Dial your call.
Using the Call Waiting, Call Park, Pickup,
and Transferring Features
These features are used slightly differently on each phone type (SIP, Digital,
and Analog). You can find these Wave phone features in Chapter 3 listed
alphabetically and each feature shows each phone type.
While on a call:
1. Press TRANS/CONF.
2. Dial the extension or press DSS.
3. Hang up to complete the operation.
Switching Between Calls
You can switch (or toggle) between calls that you have on hold. You can
answer calls, make calls, and transfer calls without losing other calls by using
the Hold feature to switch between the various calls.
To switch (toggle) from your current call to a call that is on hold:
Press Flash 4.
If you have multiple calls on hold, you will hear a menu from which you
can select the call to which you want to connect.