User guide

A-4 July 2007 - Issue 1.0 Wave Phone User Guide
Appendix A - CounterPath SIP Softphones Installing & Configuring the eyeBeam
4. Next, the Settings dialog box opens. Choose the SIP Accounts \ Add a
New SIP Account \ Server tab.
Note: If you accidentally exit the dialog box, right-click anywhere on the
eyeBeam phone and choose Settings to open it again.
5. Check Enable this SIP account. This enables the eyeBeam phone to
register with Wave.
6. Under
User details, enter the following information:
•
Display name - Enter your name as you want it displayed to callers.
•
User name - Enter your extension number.
•
Password/Authentication user name - Leave these blank.
•
Domain - Enter the name or IP address of the Wave SIP Trunks to
which this phone is registered, as provided by your system
administrator.
7. Under Domain Proxy, check both Register with domain and Use as
outbound proxy
.
8. Click the SIP Accounts \ Add a New SIP Account \ Advanced tab and
uncheck
Send SIP keep alives.