User guide

Wave Phone User Guide July 2007 - Issue 1.0 6-1
Chapter 6 - About Wave Analog Phones
While previous chapters in this guide have provided information on the basic
features and operation of all Wave phone types, this chapter specifically
describes special information regarding Analog phones only.
INTRODUCTION
Because not all of the features described in previous chapters and in this one,
are available on all Vertical Wave analog phones, it is recommended that you
contact your phone system administrator for additional information.
Special Tones
You will hear different tones while using your phone:
• Dial Tone
A continuous tone.
• Stutter Dial Tone
A broken dial tone indicates you have a voice mail message, the phone
is forwarded to another extension, or is in Do Not Disturb mode.
• Success Tone
Two short beeps indicate a successfully completed command.
• Error Tone
A fast busy signal indicates the desired command
was not completed. Try the command again.
• Interrupt Tone
The short tone you hear during a conversation on the phone indicates an
incoming call.