User guide

Wave Phone User Guide July 2007 - Issue 1.0 5-11
Chapter 5 - About Wave Digital Phones Set Up and Installation
SET UP AND INSTALLATION
Adjusting the Pedestal
1. Firmly grasp the back of the pedestal base with one hand and lift the
back portion upward with your other hand.
2. Lift the front panel of the phone upward with one hand and, with the other
hand, raise the supporting arms.
Notice there are three sets of notches behind both sides of the front
panel. Each notch represents a different angle.
3. When the phone is at the desired height, select the closest pair of
notches and insert the supporting arms in the notches.
4. Press down gently on the front panel until you feel the supporting arms
snap into place.
telephone
supporting
arm
pedestal base
first notch
(lowest position)
second notch
(mid-position)
third notch
(highest position)