User guide

5-10 July 2007 - Issue 1.0 Wave Phone User Guide
Chapter 5 - About Wave Digital Phones Introduction
Line Keys
All phones have a primary line key. Your phone might also include one or more
secondary line keys and outside line keys. Line keys are idle when there is no
LED lit beside them. Lines with a red LED are in use and you cannot join the
call. Lines with a green LED indicate calls connected to your phone. Lines with
a flashing green LED indicate calls connected to other phones that allow you
to join the call.
Primary line key
Your primary extension number is assigned to one of the programmable
feature keys on your phone. Your extension number should appear on the
label strip next to your primary line key. If your phone is idle and you take it off
hook, the LED next to the line key will light up, and the extension number will
be displayed.
Secondary line keys
You might have one or more secondary lines assigned to your phone. These
additional lines might be primary lines that appear on other phones. You can
use these additional lines to make or receive phone calls.
Display Information
The Edge 100 and Impact SCS phone models all provide a back-lit, two-line
display to give you additional call information.
When you are not using your phone, line one of the display shows the date and
time, and line two of the display shows either:
• the number of voice mail messages in your mailbox
(for example, 2 Msg)
OR
•
VMAIL and MENU if no messages are in your voice mail box
While you are dialing, line one of the display shows your extension number
and line two displays the digits as they are dialed. During an active call on your
primary line, line one displays the other party’s name or the trunk group your
call is using, and line two lists the other party’s phone number.
The display does not show caller ID information on an inbound call if that
information is blocked by the other party, or if your phone service provider does
not send caller ID. The display shows “Private” or inbound trunk group
information instead. A call timer displays the length of time your call is
connected.