Installation guide

Wave Global Administrator Guide
Chapter 35
35. Starting the TFTP Server
CHAPTER CONTENTS
Wave includes a Trivial File Transfer Protocol (TFTP) server component to support
configuration of Vertical SIP phones.
Starting the TFTP Server
The TFTP Server is not started by default. The TFTP server is automatically started after you
enter the first Wave IP User license in the Software Licenses applet. If you need to manually
start the TFTP server for some reason, start it using the following procedure.
To start the TFTP server on your Wave system
1 Click the Vertical Wave Desktop icon in the Management Console.
2 Click
OK to clear the warning message that is displayed.
Note: When you launch certain Microsoft Windows tools from the Global Administrator
Management Console, they start up in a remote control window that allows tools or applications
running on the server (the Wave system in this case) to appear on the client (your workstation).
Each time you use one of these tools, you will perform a remote control log on. See “Remote
access applets” on page 2-7 for detailed information and an example.
Starting the TFTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-1
Click
Release 2.0
September 2010