Installation guide

Setting and viewing system locale settings 33-4
Chapter 33: System Locale Settings
Wave Global Administrator Guide
• Outbound Routing Mode. Determines how outbound calls are processed. Select North
American
or International.
•
Ring Cadence. Specifies the duration of each ring and the pause between rings.
•
Minimum Analog Hook Flash. Specifies in milliseconds the minimum time an analog
phone user must hold down the switch hook to indicate a flash.
•
Tone Set. Affects the tones (dial tone, busy tone, and so forth) that users will hear.
•
Line Impedance. Sets the line impedance of analog trunks to match your locale’s
default line impedance.
•
Audio Format. Sets the mode for analog-to-digital conversion on the Wave Server.
•
Mu-Law (the default) is the most common audio format used in North America.
•
A-Law is the most common format outside of North America.
•
Trunk Locale. Affects the behavior of ISDN services.
•
Dialing Details. The default values for the following settings may need to be changed
depending on the dialing details for your site:
•
Dial local numbers without area code
• Include long distance prefix in area code
5 Click OK to return to the General Setting applet System tab.
6 Click
Apply to save your changes.
7 Click
Done to return to the Management Console.
Release 2.0
September 2010