Installation guide

T-1 Private SNMP agent 32-56
Chapter 32: SNMP Agents
Wave Global Administrator Guide
vdsx1TrunkRedLED
R Specifies the RED LED
status of this trunk.
Integer 0 = OFF
1 = ON
vdsx1TrunkYellowLED
R Specifies the YELLOW
LED status of this trunk.
Integer 0 = OFF
1 = ON
vdsx1TrunkChangePending
R Indicates that a change to
the device values have been
made to the registry.
The interpretation of the
values are:
1 = change made to the
registry, but not
incorporated in the device
yet.
0 = the device changes the
value to 0 from 1, after it
incorporates the value from
registry.
Integer
0-1
vdsx1TrunkLOSThreshold
R Loss of Signal Threshold in
volts. The value is
indirectly defined by
vdsx1TrunkLoopLength.
Integer 0 = lOS1point36
1 = lOS1point04
2 = lOS0point84
3 = lOS0point62
4 = lOS0point43
5 = lOS0point32
6 = lOS0point22
7 = lOS-NOT-IN-USE
vdsx1TrunkTransmit
PulseMask
R Transmit Pulse Mask. Its
value is indirectly defined
by vdsx1TrunkLoopLength.
Integer
1-16777215
vdsx1TrunkReceive
Equalizer
R Receive Equalizer.Its value
is indirectly defined by
vdsx1TrunkLoopLength.
Integer 0 = FALSE
1 = TRUE
T-1 Private SNMP agent - Trunk Table
MIB Variable Access Definition Syntax Value
Release 2.0
September 2010