Installation guide

T-1 Private SNMP agent 32-55
Chapter 32: SNMP Agents
Wave Global Administrator Guide
vdsx1TrunkIsdnSignaling
Protocol
R Defines the switch type for
the Isdn protocol stack.
•
not-applicable = not
a supported configura-
tion
•
invalid = not in range
•
ess4 = USA/AT&T
4ESS
•
ess5 = USA/AT&T
5ESS
•
dms100 =
USA/Northern Tele-
com DMS100
•
ni2 = USA/National
ISDN 2 (BRI, PRI)
• dms100s100 = NT
DMS-100
switch/S-100
Integer 0 = not-applicable
1 = invalid
5 = ess4
6 = ess5
7 = dms100
10 = ni2
263 = dms100s100
vdsx1TrunkLineCoding
R Line coding for Trunk. T-1
trunk.
Integer 2 = B8ZS
5 = AMI
vdsx1TrunkFraming
R Defines framing for trunk.
T-1 trunk can be either ESF
(2) or D4 (3).
Integer 1 = other
2 = ESF
3 = D4
vdsx1TrunkNumberOf
Channels
R The maximum number of
channels to be initiated for
this trunk: 0-24 for T-1, 0-8
for CO POTS.
Integer
0-24
vdsx1TrunkLineBuildOut
R Defines the line build out
option.
Integer 1 = buildOut-minus7point5dB
2 = buildOut-minus15dB
3 = buildOut-minus22point5dB
100 = buildOut-0dB
vdsx1TrunkLoopback
R This variable represents the
loopback configuration of
the DS1 interface.
Integer 1 = vdsx1NoLoop
2 = vdsx1PayloadLoop
3 = vdsx1LineLoop
4 = vdsx1OtherLoop
T-1 Private SNMP agent - Trunk Table
MIB Variable Access Definition Syntax Value
Release 2.0
September 2010