Installation guide

T-1 Private SNMP agent 32-54
Chapter 32: SNMP Agents
Wave Global Administrator Guide
vdsx1TrunkMasterPriority
R Designates the priority for
selecting which trunk is to
drive the MVIP clock, for
example, which trunk
drives the master timing
system. The values must be
different for each trunk in
the system.
Integer 1 = primary
2 = secondary
100 = notUsed
vdsx1TrunkStream
R The MVIP stream for this
trunk.
Integer
0-7
vdsx1TrunkStartingChannel
R The starting MVIP channel
for this trunk within its
MVIP stream. If CardType
is DTM or WAN1, this
value is 0; if CardType is
CO-POTS, this value is 16
or 24.
Integer
0 = DTM or WAN1
16 or 24 = CO-POTS
vdsx1TrunkType
R The trunk type for this
trunk: defines T-1 and
Common Channel
Signaling (CCS) vs.
Channel Associated
Signaling (CAS). All
applicable device types are
listed here.
Integer
1 = dev-t1CAS
2 = dev-t1CCS
7 = dev-coPOTS
16 = dev-CSU-DSU
100 = dev-undef
T-1 Private SNMP agent - Trunk Table
MIB Variable Access Definition Syntax Value
Release 2.0
September 2010