Installation guide

T-1 Private SNMP agent 32-53
Chapter 32: SNMP Agents
Wave Global Administrator Guide
Trunk Table
Each entry in the following table contains configuration information about each trunk in each
module of the system, such as the type of Trunk (T-1, as well as Common Channel Signaling
(CCS) vs. Channel Associated Signaling (CAS) (vdsx1TrunkType). In addition, this table
describes various status information relating to this trunk, such as the channel count for this
trunk (vdsx1channelCount). Each entry in the trunk table is indexed by the interface number of
the T-1 device within the system.
T-1 Private SNMP agent - Trunk Table
MIB Variable Access Definition Syntax Value
vdsx1TrunkIfIndex
R The ifIndex (dsx1IfIndex)
of this DS1 interface.
Integer 1-’7fffffff’h
vdsx1TrunkIndex
R The index into the number
of trunks associated with
the card containing this
trunk.
Integer 1-’7fffffff’h
vdsx1TrunkIdentifier
R The value of the
dsx1CircuitIdentifier from
the Configuration Table of
the T-1 standard MIB.
String
vdsx1TrunkSlotNumber
R The logical number of the
card containing this trunk.
Integer
0-255
vdsx1TrunkDeviceNumber
R The value for this object is
the logical device number
of this trunk within its slot.
T h is n um b er m a y b e u s ed t o
identify this device in the
registry.
Integer
0-255
vdsx1TrunkInterrupt
R Interrupt Request level for
this card/trunk.
NOTE: all trunks in the
same card have the same
IRQ.
Integer
1-2147483647
vdsx1TrunkEnabled
R Setting this variable to
Deactivated will disable the
trunk.
Integer 1 = vdsx1TrunkActivated
2 = vdsx1TrunkNotConfigured
100 = vdsx1TrunkDeactivated
Release 2.0
September 2010