Installation guide

Station Private SNMP agent 32-37
Chapter 32: SNMP Agents
Wave Global Administrator Guide
Device Table
vStationCardErrorLED
R All Vertical Communications cards have
an Error LED and a Ready LED. The
combined value of these LEDs are as
follows:
Error Ready ValueDefinition
off off (0 0)invalid
on off (1 0)powering up
on on (1 1)initializing
off on (0 1)normal
Integer
0-1
vStationCardReadyLED
R See vStationCardErrorLED. Integer
0-1
Station Private SNMP agent - Station Card Group - Device Table
MIB Variable Access Definition Syntax Value
vStationDeviceSlot
Number
R Physical slot in the system in which the card
containing the device is installed.
Integer
0-255
vStationDeviceDevice
Number
R The logical device number for this station
device in its card.
Integer
0-255
vStationDeviceIfIndex
R The Interface index for this device. The value
for this object correlates to the IfIndex found
in MIB-II
Integer
1-’7fffffff’h
vStationDeviceBaseIO
Address
R The ISA bus base address for this card. Integer
0-’7fffffff’h
vStationDeviceEnabled
R Setting this variable to Disabled will disable
this particular station device.
Integer 0 = Disabled
1 = Enabled
vStationDeviceInterrupt
R Interrupt Request level for this card. Integer
1-2147483647
vStationDeviceNum
Channels
R The ISA bus address for this card. Integer 1-’7fffffff’h
vStationDeviceMVIP
StartingChannel
R Vertical Communications card revision level. Integer
0-255
Station Private SNMP agent - Station Card Group - Card Table
MIB Variable Access Definition Syntax Value
Release 2.0
September 2010