Installation guide

Repeater Private agent 32-34
Chapter 32: SNMP Agents
Wave Global Administrator Guide
Monitor Repeater 100 Table
A table of additional information about each 100 Mb/s repeater, augmenting the entries in the
rptrMonTable. Entries exist in this table only for 100 Mb/s repeaters.
Table 0-9 Monitor repeater 100 table, Repeater hub agent
MIB Variable Access Definition Syntax Value
vrptrMonUpper32TotalOctets
R The total number of octets contained in the valid
frames that have been received on the ports in
this repeater, modulo 2**32. That is, it contains
the upper 32 bits of a 64-bit counter, of which
the lower 32 bits are contained in the
rptrMonTotalOctets object. If an
implementation cannot obtain a count of octets
as seen by the repeater itself, the 64-bit value
may be the summation of the values of the
rptrMonitorPortReadableOctets counters
combined with the corresponding
rptrMonitorPortUpper32Octets counters for all
the ports in the repeater.
Counter
vrptrMonHCTotalOctets
R The total number of octets contained in the valid
frames that have been received on the ports in
this group. If an implementation cannot obtain a
count of octets as seen by the repeater itself, this
counter may be the summation of the values of
the rptrMonitorPortReadableOctets counters for
all of the ports in the group.
Counter
Release 2.0
September 2010