Installation guide

Repeater Private agent 32-32
Chapter 32: SNMP Agents
Wave Global Administrator Guide
Monitor Repeater Table
The Monitor Repeater Table shows performance and error statistics for
10 MB repeaters within the system.
Table 0-8 Monitor repeater table, Repeater hub agent
MIB Variable Access Definition Syntax Value
vrptrMonTxCollisions
R This counter is incremented every time
the repeater state machine enters the
TRANSMIT COLLISION state from any
state other than ONE PORT LEFT.
Integer -1 = notSupported
0 = supported
vrptrMonTotalFrames
R The number of frames of valid frame
length that have been received on this
port for which the FCSError and
CollisionEvent signals were not asserted.
Counter
vrptrMonTotalErrors
R The total number of errors which have
occurred on all the ports of this repeater.
Counter
vrptrMonTotalOctets
R The total number of octets contained in
valid frames that have been received on
ports in this repeater.
Integer
-1 = notSupported
0 = supported
vrptrMon100Table
NA A table of additional information about
each 100 Mb/s repeater, augmenting the
entries in the rptrMonTable. Entries exist
in this table only for 100 Mb/s repeaters.
Sequence of
VRptrMon1
00Entry
vrptrMon100Entry
NA An entry in the table, containing
information about a single 100 Mbps
repeater.
VRptrMon1
00Entry
Release 2.0
September 2010