Installation guide

Repeater Private agent 32-27
Chapter 32: SNMP Agents
Wave Global Administrator Guide
Monitor Group
The Monitor Port Table (Table 0-6) contains performance and error statistics for each port in the
system.
Table 0-6 Monitor port table, Repeater hub agent
MIB Variable Access Definition Syntax Value
vrptrMonitorPortGroupIndex
R Identifies the group containing
the port for which this entry
contains information.
Integer
1-2147483647
vrptrMonitorPortIndex
R Identifies the port within the
group for which this entry
contains information.
Integer
1-2147483647
vrptrMonitorPortReadableFrames
R The number of frames of valid
frame length that have been
received on this port.
Integer
vrptrMonitorPortReadableOctets
R The number of octets contained
in valid frames that have been
received on this port.
Integer -1 = notSupported
0 = supported
vrptrMonitorPortFCSErrors
R The number of frames with
FCS error signal asserted on
this port.
Integer -1 = notSupported
0 = supported
vrptrMonitorPortAlignmentErrors
R The number of frames with
FCS and Framing error signals
asserted.
Integer
-1 = notSupported
0 = supported
vrptrMonitorPortFrameTooLongs
R The number of frames with
OctetCount greater than
maxFrameSize.
Integer -1 = notSupported
0 = supported
vrptrMonitorPortShortEvents
R This counter is incremented by
one for each CarrierEvent on
this port with ActivityDuration
less than ShortEventMaxTime.
Integer
vrptrMonitorPortRunts
R Usually indicates collision
fragments.
Integer -1 = notSupported
0 = supported
Release 2.0
September 2010