Installation guide

Repeater Private agent 32-23
Chapter 32: SNMP Agents
Wave Global Administrator Guide
Basic Package Group
The Group Table contains status information about each group of ports within the system, such
as the Operation Status of the group (operational, malfunctioning, notPresent)
(vrptrGroupOperStatus), the port capacity of this group (vrptrGroupPortCapacity).
Table 0-3 Group table, Repeater hub agent
MIB Variable Access Definition Syntax Value
vrptrGroupIndex
R Identifies the group within the system for
which this entry contains information.
Integer
1-2147483647
vrptrGroupObjectID
R The vendor’s authoritative identification
of the group.
OID
vrptrGroupOperStatus
R An object that indicates the operational
status of the group.
A status of notPresent (4) indicates that
the group is temporarily or permanently,
physically and/or logically, not a part of
the repeater. It is an
implementation-specific matter as to
whether the agent effectively removes
notPresent entries from the table.
Integer
1 = other,
2 = operational
3 = malfunctioning
4 = notPresent
5 = underTest
6 = resetInProgress
vrptrGroupPortCapacity
R The vrptrGroupPortCapacity is the
number of ports that can be contained
within the group. Within each group, the
ports are uniquely numbered in the range
from 1 to vrptrGroupPortCapacity.
Integer
1-2147483647
vrptrGroupSlotNumber
R The slot number in which this repeater
device resides.
Integer
1-18
vrptrGroupBroadcast
domainNumber
R This object indicates the repeater’s
broadcast domain. This value will be 0 if
the broadcast domain number is
unknown.
Integer
1-18
Release 2.0
September 2010