Installation guide

ISDN agent 32-18
Chapter 32: SNMP Agents
Wave Global Administrator Guide
The Bearer Group
The Bearer Group’s sole table, the Bearer Table, has as many entries as there are bearer channels
in the whole system (the total of all bearer channels for all devices in the system). Each entry in
the table defines configuration as well as statistical parameters required to control one bearer
channel.
Examples for these include the bearer channel type (leased vs. dial-up
(visdnBearerChannelType)), the bearer channel operator status (idle, connecting, connected,
active (visdnBearerOperStatus)). Each entry in this table is indexed by the unique interface
index (ifIndex) of the B channel in the system.
MIB Variable Access Definition Syntax Value
visdnBearerChannelType
R The B channel type. Integer 1 = Dialup
2 = Leased
visdnBearerOperStatus
R The current call state of the
channel.
Integer 1 = Idle
2 = Connecting
3 = Connected
4 = Active4
visdnBearerChannelNumber
R The B channel number. Integer
1-30
visdnBearerPeerAddress
R The ISDN address the current
or last call is or was connected
to.
String
visdnBearerPeerSubAddress
R The ISDN subaddress that the
current or last call is or was
connected to.
String
visdnBearerCallOrigin
R The call origin for the current
or last call.
Integer 1 = Unknown
2 = Originate
3 = Answer
4 = Callback
Release 2.0
September 2010