Installation guide

ISDN agent 32-15
Chapter 32: SNMP Agents
Wave Global Administrator Guide
IP Telephony agent Traps
ISDN agent
The ISDN agent is used to manage Vertical Communication’s ISDN interfaces, including
information for managing the Bearer B channels and signaling channels. The ISDN agent is
based on Vertical’s private ISDN MIB (isdn_private.mib), using the definitions of SNMP v2
ISDN MIB (RFC 2127) with the syntax changed to reflect SNMP v1. The relative tree structure
in this MIB has been retained. In order to manage ISDN interfaces, the following information
is necessary:
• Information for managing the physical interface (the T-1 line)
This information is already provided by the T-1 standard (RFC 1406) and the T-1 private
MIB; the respective agents for these MIBs implement the management functionality.
• Information for managing the Bearer B channels
This information is implemented by this agent.
• Information for managing signaling channels
This information is implemented by this agent.
Trap # Trap Name Description Pertinent MIB Data
64
IpTelReconfigComplete This notification is sent when the reconfiguration
command completes.
IptelTrunkSize
65
IpTelTrunkFailure This notification is issued when the specified trunk
fails
TrunkIndex
66
IpTelTrunkAlarmInfo Informational alarm associated with some
parameter threshold being reached.
TrunkIndex
LocalAlarmThreshold
RemoteAlarmThreshold
Release 2.0
September 2010