Installation guide

IP Telephony agent 32-14
Chapter 32: SNMP Agents
Wave Global Administrator Guide
IP Telephony agent
The IP Telephony agent is used to monitor IP Telephony trunks.
IP Telephony Trunk Summary Table
MIB Variable Access Definition Syntax Value
IpTelTrunkSize
R Number of trunks. Integer
TrunkIndex
R Trunk number in the trunk table. Integer
TrunkState
R The state of the trunk. Integer 0 = not-configured
1 = out_of_service
2 = Initializing
3 = Idle
4 = Outgoing
5 = Incoming
6 = Connected
7 = Disconnecting
CalledParty
R Number of the called party. String
CallingParty
R Number of the calling party. String
RemoteGateway
R Remote gateway number. String
LocalAlarmThreshold
R Current levels of thresholds reached. It
is a bit field indicating the following
thresholds:
Bit Description
•
0 = Jitter
•
1 = Network Lost
•
2 = Network To Host Errors
•
3 = Host To Network Errors
•
4 = DSP To Host Errors
•
5 = Host To DSP Errors
Integer
RemoteAlarmThreshold
R Current levels of thresholds reached.
For a description of the bit fields see
LocalAlarmThreshold.
Release 2.0
September 2010