Installation guide

Interfaces agent 32-13
Chapter 32: SNMP Agents
Wave Global Administrator Guide
Interfaces Group
MIB Variable Access Definition Syntax Value
vifNumber
R The number of Wave devices (regardless of their
current state) present on this system. Size of the
integer is 1-’7fffffff’h
Integer
vifIndex
R A unique index identifying this interface (device). Integer
vifDescr
R This object describes the interface in more detail. It
also specifies the slot number occupied by the
interface. Size of the string is 0-255 characters.
String
vifType
R This object describes the type of this interface. The
type of interface is distinguished according to the
physical/link protocol(s) immediately below the
network layer in the protocol stack. The values for
these types are taken from the similar table in MIB
II. Only the following apply to Wave:
•
ds1. T-1 interface
• other. All other interfaces
Integer
1 = other
18 = ds1
vifOperStatus
R This object describes the current operational status
of the interface. The following are valid values:
•
up. Normal operation state
• down. Device is not functional
• testing. In a test mode
Integer up=1
down=2
testing=3
vifSpecific
R This object refers to the Object Identifier branch of
the MIB tree that describes this particular interface
in more detail. For example, for T-1 interfaces,
ifSpecific should specify Vertical’s T-1 MIB
branch, i.e., 1.3.6.1.4.1.2338.3
OID
Release 2.0
September 2010