Installation guide

Setting general options 4-6
Chapter 4: System Settings in the User/Group Management applet
Wave Global Administrator Guide
When this option is selected, when a ViewPoint user creates a routing list action that
calls all of the members of a ViewPoint Group simultaneously, ViewPoint checks that
the Group does not contain more contacts than the number specified in
Maximum
number of calls
. If that check fails, the user is informed that “A Group that is called
simultaneously cannot have more than n contact(s). This setting is determined by
your Administrator to conserve phone line usage.”
Note that a user who is a member of the Group is not counted toward the limit, even if
the user’s calls are being forwarded to an external number, because call forwarding is
ignored when a user is called as a member of a Group—the call rings the user’s
phone, and is not forwarded.
•
Maximum number of calls. Maximum number of external numbers that can be
called simultaneously by a ViewPoint routing list action. The default value is 1.
6 Click
OK.
Configuring the dial-by-name directory
The dial-by-name directory enables callers to dial Wave users by name, which is helpful when
the extension is not known.
To configure the dial-by-name directory
1 If necessary, click the Administration tab of the Management Console.
2 Click the User/Group Management icon, located in the PBX Administration section of the
Management Console.
3 Choose
Tools > System Settings.
Click
Release 2.0
September 2010