Installation guide

Automatic Line Selection 29-29
Chapter 29: Understanding Wave Call Routing
Wave Global Administrator Guide
Example 1: Secondary line without ALS ringing
In the following diagram, line 130 is ringing, and is not configured for Automatic Line Selection
(ALS). Lifting the handset, or pressing Speaker/Mute, pressing Auto Dial, Redial, or Flash
selects the primary line.
Example 2: Secondary line with ALS ringing
In the following diagram, both lines 130 and 140 are ringing. Lifting the handset, or pressing
Speaker/Mute, answers the call on 140. Pressing Auto Dial, Redial, or Flash selects the primary
line.
Example 3: Primary line in use
In the following diagram, the primary line is in use by another phone. Lifting the handset, or
pressing Speaker/Mute, selects line 140. Pressing Auto Dial, Redial, or Flash also selects line
140. To select line 130, you must press 130.
100
130
140
Primary line
Secondary line appearance with ALS
Idle
In use
Ringing
LED states
Label LED Button Description
Secondary line appearance
100
130
140
Primary line
Secondary line appearance with ALS
Idle
In use
Ringing
LED states
Secondary line appearance
100
130
140
Primary line
Secondary line appearance with ALS
Idle
In use
Ringing
LED states
Secondary line appearance
Release 2.0
September 2010