Installation guide

Inbound call routing 29-20
Chapter 29: Understanding Wave Call Routing
Wave Global Administrator Guide
The following table illustrates a sample inbound routing table:
Trunks receive digits from another PBX
When the inbound trunks receive digits from another PBX, digit translation should be handled
by the PBX sending the digits, therefore no translation is necessary. In this case you should send
the digits straight to the First Digit Table for digit collection and interpretation.
The following diagram illustrates Receive digits from another PBX inbound call routing details:
Step Dialed Number Destination Description
1 Default 2xxx AutoAttendant
Inbound
Call Routing
Route to
Translate Number
Extension/Trunk
Fast Busy/
Send to Intercept
Wink Start
Trunks
1000
Search for Match
Match
Inbound Routing Table
No Match—Use As Is
My In Trunks
Collect Digits
Inbound Trunk Group
Intercept: 500
Release 2.0
September 2010