Installation guide

Outbound call routing 29-14
Chapter 29: Understanding Wave Call Routing
Wave Global Administrator Guide
The following diagram shows a simplified outbound call routing scenario highlighting
destination access code/direct to trunk group routing:
Destination access code table
A destination access code table allows Wave to verify that a specific extension has permission
to use a destination access code (see Destination Access Codes in the figure above). Permission
to use a destination access code is enabled in each of the destination access code tables
associated with a specific access profile. Once an extension has permission to use the
destination access code, the only restriction to the types of calls that can be made are the number
of digits you collect.
Fast Busy/
Outbound Trunk Group
Outbound
Check Local
Trunks
Send to Intercept
Extensions
Outbound Routing Table
Automatic
Route
S e le c tio n
External
Extension
Direct to
Trunk Group
Destination
Not Found
Extension/
Hunt Group
“Outbound
Routing”
Blocked
Blocked
Routed
Access Codes
Allowed
101
Off-Premise Extension Table
Release 2.0
September 2010