Installation guide

Adding accounts and passwords 3-9
Chapter 3: Before You Begin
Wave Global Administrator Guide
6 Enter a Password and confirm it in the appropriate fields.
The password can be from 3 to 14 characters in length, and can use any combination of
characters except spaces.
Important: See “Securing your system against toll fraud” on page A-3 for important
information about enhancing system security via secure passwords.
7 Choose
Enterprise from the Access Level drop-down list.
8 Click
OK to close the dialog.
The information you have specified will appear in the account list in the Password
Administration applet.
9 Repeat steps 3 through 8 to create additional accounts. (For accounts with lower access
levels, choose
Manager or User instead of Enterprise in step 7.)
10 Click
Done to return to the Management Console.
11 To secure your Wave system, you must log off and log on again with your new
enterprise-level user name and password, then return to the Password Administration
applet and delete the default accounts.
Caution: Be sure to keep a record of the new account passwords. Once you remove
the default accounts, the only access will be through the new accounts. If you lose
your enterprise-level password, you must reinstall and reconfigure your system to
gain access.
Configuring access permissions
Access permissions for most of the Management Configuration applets can be customized. One
of three access levels—enterprise, manager, and user—can be selected for each applet. When a
logged-on user does not have permission to use an applet, its icon appears dimmed to indicate
that the applet is unavailable.
Note: The Access Permissions and Password Administration applets are fixed at the enterprise
level and cannot be modified.
Release 2.0
September 2010