Installation guide

Planning for WaveNet 25-9
Chapter 25: Connecting Wave Servers via WaveNet
WaveNet Administrator Guide
• First Digit configured as Extension with correct length. If the first digit of a user’s
extension is currently in use and set to
Extension in the First Digit Table, the length of the
user’s extension is compared to the
Extension Length for that First Digit.
• If the lengths match, the publication request for this user is accepted, and the
corresponding Gateway user is created on the subscribing node.
• If the lengths do not match, the publication request is rejected with the error “User
Exception - First Digit Length”.
•
First Digit configured as Attendant or External. If the first digit of a user’s extension is
currently defined and set to
Attendant or External in the First Digit Table, the publication
request is rejected with the error “User Exception - Already in Use”.
Important: If the publication request is accepted (either because the First Digit was previously
Not Configured, or was configured as Extension with the correct length), WaveNet flags that
First Digit as “Protected”, to prevent any inadvertent changes that would prevent Gateway users
whose extension matches that first digit from being dialed.
External dialing issues
A First Digit Table entry set to
External defines 1-2 digit access code used to make an external
call.
Note the following:
• Digit combinations used for external dialing cannot be duplicated by any Gateway user
extensions used with WaveNet.
• Any SCP currently used for external dialing that points to a Wave Server that is also a
WaveNet node must be manually deleted or moved to a different port before publishing
any users to that Server.
Non-WaveNet off-premise extension issues
Before deploying WaveNet, you may have already configured off-premise extensions that you
want to continue using, or you may want to create them in the future for purposes unrelated to
WaveNet.
Release 2.0
September 2010