Installation guide

Verifying installed components 3-7
Chapter 3: Before You Begin
Wave Global Administrator Guide
On the Wave IP 2500 Server, the Chassis View looks like this:
Position the cursor on a card or module to display an expanded version of it, along with
statistics for that card or module, to the right of the representation of the entire chassis.
Clicking a card or module takes you to the appropriate configuration applet.
4 If a card or module is not visible in Chassis View, check the physical LEDs to make sure
they are green (on and operational).
If the physical LEDs are red (nonoperational):
a Shut down and then power off the Wave system.
b Reseat the card or module.
c Restart the system, reopen your browser window, and check Chassis View again.
d Verify that the components that were not visible now show as functioning in Chassis
View.
5 Click
Done to return to the Management Console.
Release 2.0
September 2010