Installation guide

Entering basic system information 3-4
Chapter 3: Before You Begin
Wave Global Administrator Guide
Entering basic system information
Note the following about the information you enter according to the following instructions:
•
Company Name and Main Number are both used in your external Caller ID.
•The Wave Server
Serial Number is used by Global Manager to identify each Wave Server
uniquely. Also, your Vertical Technical Support representative may request it while
troubleshooting a problem.
•The
Locale that you specify enables appropriate locale-specific system settings including
ring cadence, minimum analog hook flash, tone set, line impedance, trunk locale, and so
forth. For more about changing the
Locale setting, see Chapter 33.
•
Voice Mail System specifies the extension that users dial, or trunks group use, to reach the
voice mail hunt group. The default VoiceMail extension is 550. If you want to use a
different extension to access voicemail, see “Configuring the VoiceMail extension” on
page 7-7.
To enter the basic system information
1 If necessary, click the Administration tab of the Management Console.
2 Click the General Settings icon, located in the General Administration section.
3 Click the System tab.
4 Enter your
Company Name.
5 Enter your company’s
Main Number, for example 6173540600. You cannot enter
parentheses, spaces or dashes.
Click
Release 2.0
September 2010