Installation guide

Using Disk Management and configuring RAID 1 23-41
Chapter 23: Continuing System Administration
Wave Global Administrator Guide
Mirrored and HEALTHY disks appear like this in the Disk Management applet:
Recovering with RAID-1 Configuration
If the disk in the Wave Server’s slot A is damaged, use the disk in slot B to restart the Wave
Server.
Hint: The Windows Event Viewer may help you determine hardware status and what happened
to cause the damage.
To recover Wave from a mirrored disk
1 Shut down the Wave Server.
2 Remove the hard drive from slot A.
3 Move the mirrored hard drive from slot B to slot A.
Release 2.0
September 2010