Installation guide

About the General Settings applet 3-3
Chapter 3: Before You Begin
Wave Global Administrator Guide
PBX (Advanced) tab
•
Use Forwarding Target of Last Destination in Chain. See “Configuring calls to be
forwarded to the RNA forwarding target” on page 13-26.
•
Suppress ring if receiving page. See “Suppressing ringing on any digital phone that is
receiving a page” on page 3-11.
•
Stutter Dial Tone Duration (Seconds). See “Setting the message-waiting dial tone
duration” on page 3-10.
•
Call Park. See “Configuring Call Park options” on page 16-4.
•
Trunking. See “Configuring external call routing restrictions” on page 16-14”.
•
When dialing, wait up to ___ seconds for next digit to be entered. See “Configuring
dialing time-out” on page 16-13.
•
Require external access code to dial emergency numbers. See “Requiring an access
code for emergency number dialing” on page 16-13.
•
Enable Call Return ___ Trunk Access Code (TAC). See “Enabling call return for external
calls” on page 16-28.
WaveMail tab
• See “Synchronizing a user’s Wave voice messages and contacts with the user’s e-mail
program” on page 11-26.
ISDN tab
•
Outbound Caller ID, Inbound Caller ID. See “Configuring system-wide ISDN settings” on
page 17-12.
Fault Monitor tab
•
View Fault Monitor Error Logs. See “Viewing the Fault Monitor Error Logs” on page
23-19.
Time Service tab
• See “Configuring the time service” on page 3-11.
Release 2.0
September 2010