Installation guide

Configuring and using SNMP 23-30
Chapter 23: Continuing System Administration
Wave Global Administrator Guide
3 Click the Filter Settings button on the Traps tab.
4 You can enable or disable traps by severity or by group using the Severity and Group
drop-down lists and clicking Enable or Disable.
You can select All, Critical, Major, or Notification traps in the
Severity drop-down list.
You can select All, System, Trunk, Upgrade, Hardware, OS, Data, and MSM from the
Group drop-down list.
For those traps that are selected for filtering, the
Enabled check box is checked.
5 Click
OK.
6 Click
Done to save your changes return to the Management Console.
Release 2.0
September 2010