Installation guide

Upgrading or downgrading the Wave Server 23-15
Chapter 23: Continuing System Administration
Wave Global Administrator Guide
6 Enter the path to the upgrade CAB file in the File Name field, or click Browse to identify it.
7 Do one of the following:
•Click
Add>> to add the CAB file to the Upgrade List. To run the upgrade later, see
“Upgrading the Wave Server at a later time” on page 23-15.
•Click
Add and Start Upgrade to add the CAB files on the USB device to the Upgrade
List and start the upgrade immediately.
8 After the upgrade is complete, close all browser windows, and then run the Global
Administrator Management Console again to review the upgrade history (see “Viewing
upgrade history” on page 23-16.) You can also optionally delete backup files are created
automatically whenever you perform an upgrade (see “Deleting system backups created
during an upgrade” on page 23-17).
9 After your Wave Server is back online, click
Done in the Software Upgrade dialog to close
the Software Upgrade applet.
Upgrading the Wave Server at a later time
Perform the following steps to upgrade the Wave Server using a CAB file that you previously
uploaded and added to the Upgrade List.
To upgrade the Wave Server a later time
1 If necessary, click the Administration tab of the Management Console.
2 Click the Software Upgrade icon, located in the General Administration section.
3 Click
Start. The upgrade begins immediately.
4 After the upgrade is complete, close all browser windows, and then run the Global
Administrator Management Console again to review the upgrade history (see “Viewing
upgrade history” on page 23-16.) You can also optionally delete backup files are created
automatically whenever you perform an upgrade (see “Deleting system backups created
during an upgrade” on page 23-17).
Click
Release 2.0
September 2010