Installation guide

Upgrading or downgrading the Wave Server 23-13
Chapter 23: Continuing System Administration
Wave Global Administrator Guide
6 The Network Share option does not work with mapped drives because of network mapping
and credential restrictions. You must do one of the following to specify the CAB file:
• Enter the path to the upgrade CAB file in the
File Name field.
•Click
Browse to identify it.
If you use the
Browse button you must do the following:
a Enter the network drive name (for example, \\netdriv1).
b Press
Enter.
c Click
Browse and then select path and file of the CAB file to upload.
7 Enter your logon credentials (
User and Password) required to access the network share. If
the file is located on the Wave Server itself, no network credential are required.
8 Do one of the following:
•Click
Add>> to add the CAB file to the Upgrade List. To run the upgrade later, see
“Upgrading the Wave Server at a later time” on page 23-15.
•Click
Add and Start Upgrade to add the CAB files on the USB device to the Upgrade
List and start the upgrade immediately.
9 After the upgrade is complete, close all browser windows, and then run the Global
Administrator Management Console again to review the upgrade history (see “Viewing
upgrade history” on page 23-16.) You can also optionally delete backup files are created
automatically whenever you perform an upgrade (see “Deleting system backups created
during an upgrade” on page 23-17).
10 After your Wave Server is back online, click
Done in the Software Upgrade dialog to close
the Software Upgrade applet.
Release 2.0
September 2010