Installation guide

Monitoring database and disk usage 22-44
Chapter 22: Monitoring and Maintenance
Wave Global Administrator Guide
Viewing storage statistics
To view how much of the available space your system is currently consuming, do the following:
1 If necessary, click the Administration tab of the Management Console.
2 Click the User/Group Management icon, located in the PBX Administration section of the
Management Console.
3 Choose
Tools > System Settings. The System Settings dialog opens.
4 Choose the Storage tab.
The tab displays the following information:
Database. Percentage of disk space allocated for the Wave database that is currently
used, also shown in kilobytes used out of the total number of kilobytes allocated. The
size of the Wave database is set and the required disk space allocated when the Wave
Server is installed. The default database size is 100 MB. It will grow automatically up
to a maximum of 2 GB if you are using the MSDE database, or to the size of your
hard drive if you are using SQL Server Standard or Enterprise editions. See the Wave
Server Installation Guide for supported databases and requirements.
Note: When you start the User/Group Management applet, Wave displays a warning
message if the Wave database is 80% or more full. You should check the database
usage periodically to make sure that you are not running out of space. You will also
automatically receive e-mail notifications of low space if you have set up Windows
Event Log notifications (see “Setting up Wave Event Log notifications” on page
22-16).
Click
Release 2.0
September 2010